GN860 Pneumatically Operated Toggle Clamp, Magnetic Piston

Choose your Part

Please select desired options to reveal part number, price and availability

Options

Type AP - Forked clamping arm, two flanged washers

Type CP - Forked clamping arm, with two flanged washers and clamping screw GN708.1 

Type EP - Solid clamping arm, with clasp for welding

Coding M - Magnetic piston 

Product Description

GN860 Pneumatically Operated Toggle Clamp, Magnetic Piston

The clamping principle of these toggle clamps, GN 860, is identical in construction and dimensions to the manually operated vertical clamps GN810.

To ensure an extended life of the mechanical parts as well as the air cylinders the operating pressure should not exceed 6 bar, and a compressed air maintenance unit should be installed upstream

Toggle clamps GN860 have a permanent magnet integrated into the piston. In conjunction with sensors GN3380, it is possible to detect the end position, such as for implementing machine controls.

Compatible with GN708.1 clamping bolt, with rubber tip.

Spcification

Parts in sheet metal - Case-hardened Steel C10, zinc plated, blue passivated

Bearing pins - Hardened

Bearing rivets - Case-hardened

Air cylinder bearing pins - Case-hardened

Double-action air cylinder - Max. pressure 6 bar

All moving parts lubricated with special grease.

Clamping screw GN708.1, type A - Steel. zinc plated, rubber tip 85 Shore A.

Accessories:

Clamping screws

Holders for clamping screws (for type AP)

Holders for clamping screws  (for type EP3)

Sensor GN3380