Standard_Parts_Catalogue

Page 901 | 3.1 Indexing, Locking, Blocking with Pins and Ball-Shaped Elements 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 GN 817.6 Stainless Steel Indexing Plungers continued Electrical properties of the sensor Output function Normally open (NO) 1 4 3 NO + - Switch output PNP Supply voltage 10 - 30 V DC Continuous current I a ≤ 100 mA Connection type Plug (S) 3-pole plug M8x1, freely rotating with knurled screw connection, with PUR cable 0.5 m 3 4 1 Protection class IP 67 Switching frequency 1,000 Hz Power consumption ≤ 8 mA Voltage drop ≤ 2.5 V Protection class III Response sensitivity 2.8 mT Temperature range -25 °C ... +75 °C Shock and vibration resistance 30 g, 11 ms / 10 ... 55 Hz, 1 mm EMC acc. EN 60947-5-2 Reverse polarity protection Yes Short-circuit protection Yes Activation impulse suppression Yes Approvals, conformities CE declaration Assembly instruction The position of the sensor cable can be chosen freely during installation of the sensor clip. Installation steps: 1. Insert the sensor into the sensor clip from the side. 2. Tighten the hexagon socket screw of the sensor. 3. Clip the sensor clip into the ring groove of the indexing plunger in any orientation and then adjust the direction by turning, if necessary.