Standard_Parts_Catalogue

Page 856 | 2.4 Tensioning with Clamping Mechanisms GN 831 Toggle Latches Steel / Stainless Steel 1 Size 2 Type 3 Material 4 Identification No. How to order 1 2 3 4 GN831-100-SV-ST-2 2 Type A Without safety catch S With safety catch SV For safety catch with padlock 4 Identification No. 1 Long type 2 Short type Size l 3 l 4 min. Identification No. 2 l 5 min. Identification No. 2 m 1 m 2 m 3 m 4 r w 1 ≈ Stroke w 2 ≈ Adjustable range Type A Type SV Type S Type A Type SV Type S Type A Type SV Type S 100 19,5 31 38 54 61 14,3 7 4 8 51 5,5 12 8 1 Size F H in N Holding capacity b 1 b 2 b 3 b 4 d h 1 h 2 h 3 h 4 l 1 min. Identification No. 1 l 2 min. Identification No. 1 Type A Type SV Type S Type A Type SV Type S 100 1000 25,5 22 26 14 4,2 18,5 8,5 21,5 25,5 67 74 56 63 Toggle latches GN 831 are used among others for the secure holding of flaps and container lids. The clamps will lock securely over the centre and are thus vibration proof. The stroke w 1 of the clamping hook can pull the parts to be clamped to- gether by up to 6 mm. The range w 2 can be adjusted on the M6 threaded spindle at the clamping hook. The types S and SV prevent unwanted release of the toggle latch. Screws with low head height such as DIN 6912 are used to fix the toggle latches. The load specified in the table are simply guide line values for a nominal static pulling force which the lock can withstand. Depending on the con- ditions under which these toggle latches are used such as vibration or shock loads, the holding capacity can be adversely affected. The catch bracket is included. Information • Steel ST Zinc plated, blue passivated • Stainless steel NI - - Parts in sheet metal AISI 304 - - Clamping hook / Pin AISI 303 • Stainless Steel Characteristics → Page 2166 • RoHS Specification 3