Standard_Parts_Catalogue

Page 846 | 2.4 Tensioning with Clamping Mechanisms GN 875.2 Clamping Arms with Slotted Hole, for Swing Clamps GN 875 / GN 876 2 3 For swing clamps Size d 1 m a b 1 b 2 b 3 d 2 d 3 h 1 h 2 Length l 25 14 50 20  6,5 11,3 18 M  6 8,5 16  6,5 64,6 32 / 40 16 65 25  8,5 14,5 20 M  8 8,5 18  9  82,2 50 / 63 20 85 30 10,5 17,5 25 M 10 10,5 23 10 106,2 Clamping arms GN 875.2 with slotted hole designed as accessories to swing clamps GN 875 / GN 876. The slotted hole allows arbitrary posi- tioning of application-specific pressing elements in connection with the two flanged washers. The angle orientation of the clamping arm can be set arbitrarily during mounting on the swing clamp. When tightening the screw, the piston rod must not experience any torque. The clamping arm must therefore be held to prevent twisting. Included are a socket cap screw DIN 912 and a washer ISO 7092 for fas- tening to the swing clamp as well as two flanged washers for fastening the clamping bolts. see also... • Swing Clamps GN 875 (in Block Version) → Page 842 • Swing Clamps GN 876 (with Screw-In Thread) → Page 844 Information • Aluminum AL Hard anodized HE Wear-resistant surface • Flanged washers Steel, zinc plated, blue passivated • Socket cap screw DIN 912 Steel, zinc plated, blue passivated • Washer ISO 7092 Steel, zinc plated, blue passivated • RoHS Specification 1 4 • Clamping Screws GN 708.1 → Page 812 Accessory 1 Material 2 d 1 3 m 4 Finish How to order 1 2 3 4 GN875.2-AL-16-65-HE