Standard_Parts_Catalogue

Page 817 | 2.4 Tensioning with Clamping Mechanisms Clamping arm extenders GN 801.2 are used together with toggle clamps with “forked clamping arm” to clamp something simultaneously at two points in parallel, such as with clamping screws. These are mounted to the clamping arm and affixed in the desired position along the slot. The side position of the clamping screws is adjusted via joints that enable any positioning of the spindle assemblies. A symmetrical arrangement/ setting encourages a balanced clamping result. All parts are supplied in a non-assembled set. Four flanged washers are included for fastening the clamping screw. see also... • Clamping Arm Extenders GN 801.1 (Rigid) → Page 816 • Clamping Arm Extenders GN 809.1 → Page 819 • Clamping Screws GN 804 → Page 810 • Clamping Screws GN 807 → Page 811 Information 1 m 1 2 h 1 3 Material How to order 1 2 3 GN801.2-82-16-ST • Steel ST Zinc plated, blue passivated • RoHS Specification 3 1 2 m 1 h 1 b d 1 d 2 d 3 d 4 h 2 m 2 Length l For toggle clamps GN 810 GN 810.1 GN 810.3 GN 810.4 GN 820 GN 820.1 GN 820.2 GN 820.3 GN 820.4 GN 860  82 16 19,5 6,2 M 6 9,2 12 37 22  91 130 130 125 100 18 26 8 M 8 12 16 43 27 112 230 230 200 GN 801.2 Clamping Arm Extenders with Joint, for Toggle Clamps with Forked Clamping Arm