Standard_Parts_Catalogue

Page 816 | 2.4 Tensioning with Clamping Mechanisms 1 m 2 h 1 3 Material How to order 1 2 3 GN801.1-85-16-ST Clamping arm extenders GN 801.1 are used together with toggle clamps with “forked clamping arm” to clamp something simultaneously at two points in parallel, such as with clamping screws. These are mounted to the clamping arm and affixed in the desired position along the slot. The side position of the clamping screws can also be selected via the slots, a symmetrical arrangement/setting encourages a balanced clam- ping result. All parts are supplied in a non-assembled set. Four flanged washers are included for fastening the clamping screw. see also... • Clamping Arm Extenders GN 801.2 (with Joint) → Page 817 • Clamping Arm Extenders GN 809.1 → Page 819 • Clamping Screws GN 804 → Page 810 • Clamping Screws GN 807 → Page 811 Information • Steel ST Zinc plated, blue passivated • RoHS Specification 3 1 2 m h 1 a b 1 b 2 d 1 d 2 h 2 ≈ h 3 h 4 Length l For toggle clamps GN 810 GN 810.1 GN 810.3 GN 810.4 GN 820 GN 820.1 GN 820.2 GN 820.3 GN 820.4 GN 860 GN 842  85 16 25 11,5 15 6,2 M 6 5,7 12 37 100 130 130 125 70 100 18 30 14 18 8,2 M 8 6,3 15,5 43 120 230 230 200 360 GN 801.1 Clamping Arm Extenders Rigid, for Toggle Clamps with Forked Clamping Arm