Standard_Parts_Catalogue

Page 803 | 2.4 Tensioning with Clamping Mechanisms GN 862.1 Toggle Clamps continued Toggle clamps GN 862.1 are built from the same construction as GN 862. The special features of these clamps are that they can be mounted in two different planes, and they can also be operated manually via the grip handle. For example, they can individually be manually closed, and then all clamps can be opened at once via the pneumatic function. To ensure an extended life of the mechanical parts as well as the air cylin- ders, the operating pressure should not exceed 6 bar and a compressed air maintenance unit should be installed upstream. Toggle clamps GN 862.1 have a permanent magnet integrated into the piston. In conjunction with sensors GN 3380, it is possible to detect the end position, such as for implementing machine controls. see also... • More Information to Toggle Clamps (Pneumatic) → Page 790 Information Specification • Sheet metal parts Case-hardened steel C10 Zinc plated, blue passivated • Bearing pins hardened • Bearing rivets case-hardened • Air cylinder bearing pins Case-hardened • Double-action air cylinder Max. pressure 6 bar • All moving parts Lubricated with special grease • Solid designed plastic handle Red, oil resistant • Clamping screw GN 708.1, type A - - Steel, zinc plated, blue passivated - - Rubber thrust pad 85 Shore A • RoHS • Clamping Screws → Page 810 ff. • Holders for Clamping Screws GN 801 (for Type APV3S) → Page 815 • Holders for Clamping Screws GN 809 (for Type EPV3S) → Page 818 • Sensor GN 3380 → Page 850 Accessory 1 Size 2 Type 3 Coding How to order 1 2 3 GN862.1-230-APVS-M