Standard_Parts_Catalogue

Page 795 | 2.4 Tensioning with Clamping Mechanisms The clamping principle of toggle clamps GN 860 is identical in const- ruction and dimensions to the manually operated vertical toggle clamps GN 810. To ensure an extended life of the mechanical parts as well as the air cylinders, the operating pressure should not exceed 6 bar and a com- pressed air maintenance unit should be installed upstream. Toggle clamps GN 860 have a permanent magnet integrated into the pis- ton. In conjunction with sensors GN 3380, it is possible to detect the end position, such as for implementing machine controls. see also... • More Information to Toggle Clamps (Pneumatic) → Page 790 Information • Sheet metal parts Case-hardened steel C10 Zinc plated, blue passivated • Bearing pins hardened • Bearing rivets case-hardened • Air cylinder bearing pins case-hardened • Double-action air cylinder Max. pressure 6 bar • All moving parts Lubricated with special grease • Clamping screw GN 708.1, type A - - Steel, zinc plated, blue passivated - - Rubber thrust pad 85 Shore A • RoHS Specification • Clamping Screws → Page 810 ff. • Holders for Clamping Screws GN 801 (for Type AP) → Page 815 • Holders for Clamping Screws GN 809 (for Type EP) → Page 818 • Sensor GN 3380 → Page 850 Accessory GN 860 Toggle Clamps continued 1 Size 2 Type 3 Coding How to order 1 2 3 GN860-330-AP-M