Standard_Parts_Catalogue

Page 701 | 2.4 Tensioning with Clamping Mechanisms 1 Size 2 Type How to order (Steel) 1 2 GN 810-75-E Toggle clamps GN 810 work according to the toggle principle, opera- ting lever and clamping arm move in the same direction. In the clamped position the operating lever is in vertical position. Toggle clamps with forked clamping arm, in type A with two flanged washers, can accommodate an application specific screw. For type C, a clamping screw with neoprene rubber thrust pad is also included. Toggle clamps in type E can be adapted to special requirements by wel- ding with the supplied clasp or together with the clamping arm extenders GN 809. see also... • General Information for Toggle Clamps → Page 698 • Toggle Clamps GN 910 („Longlife“) → Page 712 • Toggle Clamps GN 810.1 (with Vertical Mounting Base) → Page 702 Information • Steel — - - Case-hardened Steel C 10 Zinc plated, blue passivated - - Bearing pins tempered - - Bearing rivets (for size 230 and up) Case-hardened • Stainless steel AISI 304 NI • All moving parts Lubricated with special grease • Solid designed plastic handle Red, oil resistant • Clamping screw GN 708.1, type A - - Steel, zinc plated, blue passivated / Stainless steel AISI 304 - - Rubber thrust pad 85 Shore A • Stainless Steel Characteristics → Page 2166 • RoHS Specification 3 • Clamping Screws → Page 810 ff. • Holders for Clamping Screws GN 801 (for Type A) → Page 815 • Holders for Clamping Screws GN 809 (for Type E) → Page 818 • Clamping Arm Extenders GN 801.1 (for Type A) → Page 816 • Clamping Arm Extenders GN 801.2 (for Type E) → Page 817 • Clamping Arm Extenders GN 809.1 (for Type E) → Page 819 Accessory GN 810 Toggle Clamps continued 1 Size 2 Type 3 Material How to order (Stainless steel) 1 2 3 GN 810-75-A-NI