Standard_Parts_Catalogue
Page 682 | 2.3 Tensioning with Eccentric Cams and Wedge Clamps GN 411.2 Centering Bore Clamps 1 d 1 2 Type How to order 1 2 GN411.2-30,5-K 2 Type K With clamping balls S With clamping segments With centering bore clamps GN 411.2 workpieces can be centrally posi- tioned and clamped from the inside of the bore. They offer the following advantages: - Precise self centering - Repetitive accuracy: ± 0.025 - Accuracy of concentricity: ± 0.05 - Solid and stable clamping through either 3 or 6 contact points on the workpiece - Clamping of workpieces with uneven or irregular surface (such as catings) with type K - Distortion free clamping - Reduced height - Can be fitted in any position - Large adjustable range - Draw-down clamping Information • Steel - - Hardened - - Blackened • Clamping balls / segments - - Hardened - - Plain, tumbled • ISO Fundamental Tolerances → Page 2151 • RoHS Specification • Centering bore clamps GN 411.3, operable from the opposite side respectively for hydraulic or pneumatic operation • Centering bore clamps with 2 clamping elements for clamping tubes On request 1 d 1 d 2 Clam- ping- Ø d 3 d 4 d 5 d 6 h 1 h 2 k ±0,1 l 1 l 2 l 3 t min. w 1 w 2 Number of clamping elements Clam- ping force in kN 11,7 * 14,2 - M 4 4,3 1,5 - 2,5 3,5 3,9 8,6 6,3 - 0,7 1,3 3 0,5 14,5 18,5 12 M 4 4,3 2 5,5 3,5 4,5 9,8 14,2 5 6 1,2 2,3 3 3,5 18,5 22,5 15 M 5 5,3 2,5 7,5 3 5,5 11,5 16,5 6,2 7 1,2 2,3 3 4 22,5 26,5 20 M 6 6,4 3 6 4 7 14,1 19,6 9 8 1,2 2,3 3 4,5 26,5 30,5 20 M 6 6,4 3 6 4,5 7 14,1 19,8 9 8 1,2 2,3 3 4,5 30,5 38,5 25 M 6 6,4 4 7 4,5 9 14,1 23,2 9 8 2,3 4,6 3 4,5 38,5 46,5 30 M 8 8,4 4 7,5 4,5 11 18 27,2 12 10 2,3 4,6 6 6,5 46,5 54,5 30 M 8 8,4 4 7,5 4,5 11 18 27,1 12 10 2,3 4,6 6 6,5 54,5 70,5 45 M 10 10,5 5 9 5,5 15 23,7 40,6 14 12 4,7 9,2 6 8 70,5 86,5 60 M 12 13 5 10 5,5 17 28,3 46,1 17 15 4,7 9,2 6 10 86,5 102,5 60 M 16 17 5 10 5,5 25 30,3 51,2 21 15 4,7 9,2 6 12,5 * This size is only available as type K.
Made with FlippingBook
RkJQdWJsaXNoZXIy MTQ2MTM=