Standard_Parts_Catalogue

Page 407 | 1.4 Adjusting, Positioning, Locking with and without Position Indication One advantage of electronic position determination lies in the wide range of display options on the position indicator. The following settings can be configured with the 4 function buttons: - - Selecting incremental or absolute measurement mode - - Changing the unit of dimension (mm, inch or degree) - - Resetting the counter or setting an offset value - - Changing the display value after one turn - - Changing the resolution, i.e. the number of displayed decimal places - - Changing the direction of rotation or counting - - Changing the display orientation (based on the installation orientation) - - Setting the maximum speed of rotation The installed lithium battery has a life of over 3 years. Time to replace the battery is indicated by a symbol on the display. Battery replacement is easy - simply remove the front cover. Other important information and instructions can be found in the operating instruction for position indicators GN 9153. This is included with every position indicator and can be downloaded from www.ganternorm.com in the “Service” section. Configurable display options Electrical and mechanical characteristics Tension feed Lithium battery CR2477, 3 V Battery life 3 years Display 6 digit LCD display, 12 mm high with special character support Reading scale -199999; 999999 Number of decimal digits programmable (see operating instruction) Unit of measure mm, inch or degrees (programmable) Rotation max. speed 300 / 600 / 1000 U/min (programmable, standard 600 U/min) Precision 10,000 impulses / revolution Working temperature 0 °C ... 50 °C Humidity max. 95 % at 25 °C (without condensation) Interference protection acc. to IEC 61326-1 GN 9153 Position Indicators continued