Standard_Parts_Catalogue

Page 399 | 1.4 Adjusting, Positioning, Locking with and without Position Indication GN 954 Position Indicators continued Before installation the position indicator, a locating hole must be made on the machine side for the torque limiting contact point, according to the drawing (see left). With the adapter bushings GN 952.1 (→ Page 412) , the hol- low shaft (with bore 14 H7 ) of the position indicator can be adapted to fit the spindle. If a reduction in the diameter of the hollow shaft is to be made at the same time as mounting a control knob, control knobs GN 957 (→ Page 413 ) are available which combine both functions in a single component. The mounting of the position indicator is via the torque limi- ting contact point which is connected to the hollow spindle and secured with a grub screw. With clamping plates GN 954.6 ( → Page 414) , spindles can be clamped and secured after adjusting. Installation instructions How to order GN 954.1 The spacer plate GN 954.1 in combination with the position indicators GN 954 are used to bridge the shaft shoulders, set collars and so on. The square bore holes are used for the machine-side fastening with e.g. socket button head self-tapping screws in accordance with DIN ISO 7049. Information • Plastic (Polyamide PA) Black, matte finish • RoHS Specification GN 954.1 Spacer Plate Original design BS51