Standard_Parts_Catalogue

Page 358 | 1.4 Adjusting, Positioning, Locking with and without Position Indication GN 215 Indexing Levers 1 d 1 2 d 2 3 Type How to order 1 2 3 GN215-60-K14-A 1 2 d 1 d 2 H7 Bore with keyway d 3 d 4 d 5 h 1 h 2 h 3 max. Shaft length k Length l w +0,5° 54 K 10 K 12 32 5,2 44,5 37 13 16,5 30 122 22° 60 K 14 K 16 32 5,2 50   39 15 18,5 36 125 19° With indexing levers GN 215 shafts can be turned through a predeter- mined angle and positively locked. To index, lift the lever against spring pressure from serrations (one hand control). Limiting the indexing angle can be achieved with two dowels (see sketch). The bushing is connected to the shaft via parallel key / keyway. The location flange is bolted to the machine with two screws (M 5). The lever , via the location pin, provides the connection between shaft and location flange. The serrations are protected from swarf and similar particles by the cover. This cover can be inserted by hand (elastic segments engage into a groove) and removed with a screw driver. see also... • Indexing Mechanisms GN 200 (Steel, Blackened) → Page 352 • Adjustable Knob GN 700 (with Stepless Positioning) → Page 356 Information 3 Type A Without serrations B With 30 serrations • Steel Blackened • Cover Plastic Black, with inserted Alu-disk Matte anodized, natural color • Keyway for bore K10: 3 P9 x 1,1 K12 ... K16: DIN 6885 Page 2 → Page 2079 • Ball knob DIN 319 Plastic, Duroplast Black, shiny finish • ISO Fundamental Tolerances → Page 2151 • RoHS Specification • Serrations, restricted angle to drawing On request