Standard_Parts_Catalogue

Page 225 | 1.2 Operating by Using Machine and Device Handles Mounting information 1) Drill the handle housing according to the template dimensions reported in the table. 2) Remove all drilling burrs before fitting the handle. 3) Fit the upper part of the handle into the housing and press onto the lower part until firmly in place. 4) Gently push the handle downward. 5) Fit the two self-tapping screws. 6) Assemble the screw cover by pressing on the lateral sides first and finally on the central part. GN 733 Gripping Trays continued for b 1 = 110 for b 1 = 120 Wall thickness s d ±0,02 x y m 1 m 2 x y m 1 m 2 for self- tapping screw for M3 +0,2 +0,5 ±0,1 ±0,1 +0,2 +0,5 ±0,1 ±0,1 > 1 ... 1,2 2,5 Core hole drilling 2,5 Through bore-hole 3,2 100 52 64 55,5 107,5 73 64 76,8 > 1,2 ... 1,5 2,55 100 52,2 64 55,5 107,5 73 64 77 > 1,5 ... 2 2,6 100 52,5 64 56 107,5 73 64 77,2 > 2 ... 2,5 2,65 100 52,7 64 56,2 107,5 74 64 77,5 > 2,5 ... 3 2,65 100 53 64 56,5 107,5 74 64 77,8 > 3 ... 3,5 2,7 100 53,2 64 56,7 107,5 74 64 78,1 > 3,5 ... 4 2,7 100 53,4 64 56,9 107,5 75 64 78,4 > 4 ... 4,5 2,7 100 53,6 64 57,1 107,5 75 64 78,7 > 4,5 ... 5 2,7 100 53,8 64 57,3 107,5 75 64 79