Standard_Parts_Catalogue

Page 213 | 1.2 Operating by Using Machine and Device Handles GN 430 / GN 430.1 Ledge Handles continued Go to www.ganternorm.com/en/service/downloads to obtain a ZIP-file with various documents (Word®, Open Office, PDF) which you can use to create lettering and labels. The paper strip can also hold typical lettering tape up to 18 mm in width. Information on ledge handles GN 430.1 with lettering block Thanks to the screw channel which runs all the way through, any number of screws with standard thread M6 can be placed in any locations within the screw area l 2 . Please note the following guide values: • Minimum screw-in depth: 10 mm • Max. load (screw) 400 N • Max. tightening torque: 4 Nm Information on fastening with a screw channel Application examples