Standard_Parts_Catalogue

| Load Ratings Page 2131 Load Capacity of Ball Lock Pins / Locking Pins Double Sided Shearing Resistance Information The load capacities specified in the table for the double sided shearing resistance (breaking strength) have been calculated or theoretically defi- ned on the basis of DIN 50141. At the same time, the endangered bolt cross-section S, according to a nearby sketch, was considered in two shear planes before breakage. The values were arrived at by a series of tests whereby a limited number of levelling feet were subjected for a limited time to a vertical static load to the feet. In general, they do not constitute a warranty of condition. The user must determine whether the product is suitable for the intended purpose. Environmental factors can influence the specified values. An appropriate safety factor must be taken into account in the design. F 2 F F 2 S d 1 Ball Lock Pins Load capacity F in kN ≈ double sided shearing resistance acc. DIN 50141 (breaking strength) d₁ Pin diameter GN 113.3 GN 113.4 GN 113.5 GN 113.6 GN 113.7 GN 113.8 GN 113.9 GN 113.10 GN 113.11 GN 113.12  5 14  24  14  24  14  24  14  24  14  24  6 21  35  21  35  21  35  21  35  21  35  8 38  63  38  63  38  63  38  63  38  63 10 60 100  60 100  60 100  60 100  60 100 12 87 144  87 144  87 144  87 144  87 144 16 155 257 155 257 155 257 155 257 155 257 20 244 403 - - 244 403 244 403 244 403 25 386 631 - - 386 631 386 631 386 631 Lock Pins Load capacity F in kN ≈ double sided shearing resistance acc. DIN 50141 (breaking strength) d₁ Pin diameter GN 114.2 GN 114.3 GN 114.6 GN 124.1 GN 124.2 GN 214.2 GN 214.3 GN 214.6 GN 314  6  14  17  17  22  22  14  17  17 -  8  28  35  35  40  40  28  35  35  30 10  38  47  47  62  62  38  47  47  46 12  61  75  75  90  90  61  75  75  74 16 113 138 138 - - 113 138 138 136 20 187 228 228 - - - - - 227