Standard_Parts_Catalogue

GN 109 Level Markings / Special Lengths for Oil Dipsticks For the series with oil dipstick shown above, a shortening and / or the attachment of level markings can be ordered with the service GN 109. The dipstick is shortened to the length l 1 and the marking notches are milled at l 2 or l 3 , making them easily visible. The max. length l 1 is specified in the respective series. The length specifications l 1 to l 3 refer to the contact surface without seal, with a tolerance of ±1 mm to be taken into account. For critical applications, the seal must be taken into consideration with a thickness of up to 2 mm, depending on the series. If required, more than 2 notches may be inserted on request, which are then specified by appropriate details on the position (l 4 ... l x ). Furthermore, texts such as MAX / MIN may be laser-engraved in addition to or instead of the notches by submitting the appropriate template. Information 1 l 1 (Length oil dipstick) Threaded plug GN 747-G1-B-2 with two level markings GN 109-90-80-50 2 l 2 (Dimension 1st notch) 3 l 3 (Dimension 2nd notch) How to order (With two marking notches) 1 2 3 GN109-90-80-50 1 l 1 (Length oil dipstick) Breather cap GN 552-42-G3/4-B-1 with one level marking GN 109-110-90 2 l 2 (Dimension notch) How to order (With one marking notch) 1 2 GN109-110-90 1 l 1 (Length oil dipstick) Oil filler plug GN 748-30-20-B-1 with oil dipstick in special length GN 109-85 How to order (With special length) 1 GN109- 85 1 2 3 | Modification Standards Page 2083