Standard_Parts_Catalogue

Page 1904 | 3.8 Adjusting, Moving with Guides, Spindles and Ball Rollers Support and mounting brackets Support brackets on the inner slide are available on request for some slide variants, even in small quantities. The support bracket is used for simple mounting, for example, of a drawer, if side mounting is not possible. Mounting occurs by means of through-holes that are arranged at a right angle in the bracket. The mounting screws secure only the position of the drawer in this case. Additional reinforcement of the slides themselves, as with side mounting, is not possible. The drawers should therefore be designed as rigidly as possible so that the perpendicular load does not introduce any unnecessary tension through the support bracket into the slides. Detach function Telescopic slides with a detach function can be comple- tely separated from one another in the area of the middle and inner slide. This feature not only facilitates moun- ting. It also allows the extension to be quickly removed, for example, when maintenance work is performed on the components located behind. In the example shown, the telescopic slide can be quickly and easily detached in the extracted position through activation of a flat spring, allowing the inner slide to be removed from the front. For reattaching the slides, the ball cages need to be mo- ved basically to the front end position. Then the inner slide is inserted to the back end stop where it locks back into place automatically. The protected arrangement of the various release mechanisms prevents accidental detachment of the slide. Telescopic Slides Component Options