Standard_Parts_Catalogue

Page 1864 | 3.8 Adjusting, Moving with Guides, Spindles and Ball Rollers GN 1412 Telescopic Slides with Full Extension and Self-Retracting Mechanism, Load Capacity up to 430 N 2 Type F With rubber stop, locking device in retracted position, detach function 3 Identification no. 1 Mounting using through-holes 1 l 1 2 Type 3 Identification no. 4 Finish How to order 1 2 3 4 GN 1412 -500-F-1-ZB Telescopic slides GN 1412 are installed vertically and in pairs. The stro- ke reaches ≈ 100 % of the nominal length l 1 (full extension). The rubber stops of type F dampen the impact of the slide in the end positions. This feature minimizes noise development and increases the lifespan. If larger static or dynamic loads occur in the direction of extension, they should be absorbed by external stop elements. The telescopic slides are delivered in pairs . They can be installed on the extension on either the left or right side due to the mechanics. All moun- ting holes are easy to reach through auxiliary holes. Only the mounting holes are shown, but other production-related holes may be present. see also... • Technical Information on Telescopic Slides → Page 1898 ff. • Telescopic Slides GN 1410 (with Full Extension) → Page 1861 Information • Slide profile Steel, zinc plated, blue passivated ZB • Bearings Roller bearing steel, hardened • Ball cage, outer slide Plastic • Ball cage, inner slide Steel, zinc plated • Rubber stop and detach function Plastic / Elastomer • Self-retracting mechanism Zinc plated steel/plastic • Operating temperature -20 °C to 100 °C • RoHS Specification 4 • Other lengths and hole spacing • Other attachment options • Other surfaces On request 1 1 l 1 l 2 +3 −3 l 3 F S per pair in N l 1 l 2 +3 −3 l 3 F S per pair in N Stroke at 10,000 cycles at 100,000 cycles Stroke at 10,000 cycles at 100,000 cycles 300 300 600 330 240 550 550 1100 330 240 350 350 700 380 290 600 600 1200 320 240 400 400 800 430 340 650 650 1300 300 220 450 450 900 430 340 700 700 1400 300 220 500 500 1000 380 290