Standard_Parts_Catalogue

Page 1859 | 3.8 Adjusting, Moving with Guides, Spindles and Ball Rollers 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 GN 1408 Telescopic Slides continued Mounting holes - outer slide Mounting holes - inner slide Mounting screws For the said loading forces F S to be absorbed reliably in the surrounding structure, all available through-holes of the outer slide having a diameter (Ø) of 4.2 and of the inner slide having a diameter (Ø) of 4.4 must be used. The elongated holes, Ø 4.2 x 4.4 of the outer slide and Ø 4.4 x 4.6 of the inner slide, are used likewise for mounting and facilitate adjustment during mounting when needed. Failure to use fastening screws reduces the specified load capacity accordingly. The following screws can be used for mounting: Designation - standard Outer slide Inner slide Hexagon socket button head screw ISO 7380 M 4 M 4 Pan head screw, Phillips ISO 7045 M 4 M 4 Pan head tapping screw, Phillips ISO 7049 ST 3,9 / 4,2 ST 3,9 / 4,2 1 l 1 a 2 a 3 a 4 a 5 a 6 a 7 a 8 a 9 a 10 250 -  65 - 195 210 225 - - - 300 99 129 195 257 272 - - - - 350 99 129 185 259 274 289 - - - 400 99 129 - 259 274 - 323 338 353 450 99 129 185 259 274 289 387 402 417 500 99 129 185 291 306 321 451 466 481 550 99 129 185 323 338 353 483 498 513 600 99 129 185 323 338 353 515 530 545 650 99 129 185 355 370 385 579 594 609 700 99 129 185 387 402 417 643 658 673 1 I 1 i 4 i 5 i 6 i 7 i 8 i 9 250 195 211 220 - - - 300 114 130 139 227 243 252 350 163 179 188 291 307 316 400 163 179 188 355 371 380 450 195 211 220 387 403 412 500 227 243 252 451 467 476 550 259 275 284 483 499 508 600 259 275 284 515 531 540 650 291 307 316 579 595 604 700 323 339 348 643 659 668