Standard_Parts_Catalogue

Page 1858 | 3.8 Adjusting, Moving with Guides, Spindles and Ball Rollers GN 1408 Telescopic Slides with Full Extension, Load Capacity up to 250 N Telescopic slides GN 1408 are installed vertically and in pairs. The stroke reaches ≈ 100 % of the nominal length l 1 (full extension). The telescopic slides are delivered in pairs . They can be installed on the extension on either the left or right side due to the mechanics. All moun- ting holes are easy to reach through auxiliary holes. Only the mounting holes are shown, but other production-related holes may be present. see also... • List of Telescopic Slide Types → Page 1852 • Technical Information on Telescopic Slides → Page 1898 ff. • Telescopic Slides GN 1410 (with Full Extension) → Page 1861 • Stainless Steel Telescopic Slides GN 1450 (with Full Extension) → Page 1891 • Telescopic Slides GN 1400 (with Partial Extension) → Page 1854 Information • Slide profile Steel, zinc plated, blue passivated ZB • Bearings Roller bearing steel, hardened • Ball cage, outer slide Plastic • Ball cage, inner slide Steel, zinc plated • Rubber stop and detach function Plastic / Elastomer • Operating temperature -20 °C to 100 °C • RoHS Specification 4 • Other lengths and hole spacing • Other attachment options • Other surfaces On request 2 Type F With rubber stop, locking device in retracted position, detach function 3 Identification no. 1 Mounting with through holes 1 l 1 2 Type 3 Identification no. 4 Finish How to order 1 2 3 4 GN1408-600-F-1-ZB 1 1 l 1 l 2 +3 −3 l 3 F S per pair in N l 1 l 2 +3 −3 l 3 F S per pair in N Stroke at 10,000 cycles at 100,000 cycles Stroke at 10,000 cycles at 100,000 cycles 250 250 500 200 150 500 500 1000 220 180 300 300 600 200 150 550 550 1100 220 180 350 350 700 220 180 600 600 1200 200 150 400 400 800 250 200 650 650 1300 200 150 450 450 900 250 200 700 700 1400 200 150