Standard_Parts_Catalogue

Page 1856 | 3.8 Adjusting, Moving with Guides, Spindles and Ball Rollers GN 1404 Telescopic Slides with Partial Extension, Load Capacity up to 780 N 1 l 1 2 Type 3 Identification no. 4 Finish How to order 1 2 3 4 GN1404-600-E-3-ZB 2 Type E With rubber stop, locking device in retracted position 3 Identification no. 3 Mounting with through holes on external slide and countersunk holes on inner slide 1 1 l 1 l 2 +2 −2 l 3 F S per pair in N l 1 l 2 +2 −2 l 3 F S per pair in N Stroke at 10,000 cycles at 100,000 cycles Stroke at 10,000 cycles at 100,000 cycles 300 205 490 780 600 500 373 858 540 420 350 239 574 630 490 600 457 1042 560 430 400 289 674 540 420 700 541 1226 560 430 450 339 774 460 360 • Other lengths and hole spacing • Other attachment options • With rubber stop (without locking device) • Other surfaces • With support bracket • Retraction dampening, external On request Information • Slide profile Steel, zinc plated, blue passivated ZB • Bearings Roller bearing steel, hardened • Ball cage Steel, zinc plated • Rubber stop Plastic / Elastomer • Operating temperature -20 °C to 100 °C • RoHS Specification 4 Telescopic slides GN 1404 are installed vertically and in pairs. The stroke reaches ≈ 75 % of the nominal length l 1 (partial extension). The rubber stops of type E dampen the impact of the slide in the two end positions and takes on the locking function of the back stop position. This feature is noticeable through a slight resistance on opening and closing. If larger static or dynamic loads occur in the direction of extension, they should be absorbed by external stop elements. The telescopic slides are delivered in pairs . They can be installed on the extension on either the left or right side due to the mechanics. All moun- ting holes are easy to reach without auxiliary holes. Only the mounting holes are shown, but other production-related holes may be present. see also... • Technical Information on Telescopic Slides → Page 1898 ff. • Telescopic Slides (with Full Extension) → Page 1858 ff.