Standard_Parts_Catalogue

Page 1854 | 3.8 Adjusting, Moving with Guides, Spindles and Ball Rollers 1 l 1 l 2 +2 −2 l 3 F S per pair in N Stroke at 10,000 cycles at 100,000 cycles 300 210 485 220 170 350 240 565 260 200 400 290 665 260 200 500 370 845 280 220 GN 1400 Telescopic Slides with Partial Extension, Load Capacity up to 280 N Telescopic slides GN 1400 are installed vertically and in pairs. The stroke reaches ≈ 75 % of the nominal length l 1 (partial extension). With type A without rubber stop, the end stops are made out of steel, which prevents the slide from being unintentionally pulled out or detached. If larger sta- tic or dynamic loads occur in the direction of extension, they should be absorbed by external stop elements. The telescopic slides are delivered in pairs . They can be installed on the extension on either the left or right side due to the mechanics. All mounting holes are easy to reach without additional auxiliary holes. Only the mounting holes are shown, but other production-related holes may be present. see also... • List of Telescopic Slide Types → Page 1852 • Technical Information on Telescopic Slides → Page 1898 ff. • Telescopic Slides (with Full Extension) → Page 1858 ff. • Stainless Steel Telescopic Slides (with Full Extension) → Page 1891 ff. Information • Slide profile Steel, zinc plated, blue passivated ZB • Bearings Roller bearing steel, hardened • Ball cage Steel, zinc plated • Operating temperature -20 °C to 100 °C • RoHS Specification 4 • Other lengths and hole spacing • Other attachment options • With rubber stop • With locking device (back, front, or back-front) • Other surfaces • With support bracket • With retraction dampening, external On request 2 Type A Without rubber stop 3 Identification no. 1 Mounting with through-holes 1 l 1 2 Type 3 Identification no. 4 Finish How to order 1 2 3 4 GN1400-400-A-1-ZB