Standard_Parts_Catalogue

Page 1669 | 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.6 Moving, Transferring, Connecting with Shafts and Joints DIN 71802 Stainless Steel Angled Ball Joints Extract with Threaded Ball Shank 1 d 1 2 d 2 3 Type How to order 1 2 3 DIN71802-10-M6L-CN 3 Type CSN With threaded ball shank, with safety catch CN With threaded ball shank, without safety catch 1 2 d 1 H9/h9 d 2 d 3 d 5 l 1 l 3 l 4 d 6 t Min. A/F Min. pull-off force in N Left hand thread  8 M  5 M  5L M  5        8 10    8,5 22 12,8 10,5 7 30 10 M  6 M  6L M  6       10 12,5 10,5 25 14,8 11,5 8 40 13 M  8 M  8L M  8       13 16,5 12 30 19,3 14   11 60 16 M 10 M 10L M 10       16 20   15 35 24 15,5 13 80 16 M 12 M 12L M 12       16 20   15 35 24 15,5 13 80 19 M 14F ( ≙ M 14 x 1,5) M 14FL ( ≙ M 14 x 1,5L) M 14F ( ≙ M 14 x 1,5) 22 28   19,5 45 30 21,5 16 100 Stainless steel angled ball joints DIN 71802 consist of a ball socket DIN 71805 and a ball shank DIN 71803. The angle of rotation for the type with safety catch (Type CSN) is 15°, without safety catch (Type CN) is 18°. For assembly the ball ist pushed through the circlip which acts as a retai- ner. Should the retaining force (see pull-off force in the table above) bet- ween ball and socket not be sufficient, this can be increased by adding a safety catch, which can easily be fitted. To protect the angled ball point, a dust cap GN 710 can be added. The hexagon nut is part of the angled ball joints. Information • Stainless steel AISI 303 • Ball Stainless steel - - Not hardened - - Ball seat greased • ISO Fundamental Tolerances → Page 2151 • Stainless Steel Characteristics → Page 2166 • RoHS Specification • Smooth specification (Ball seat with play) • Ball studs DIN 71803 • Ball sockets DIN 71805 • Axial joints (ball socket and ball shank in one axis) On request • Dust Caps GN 710 → Page 1671 Accessory