Standard_Parts_Catalogue

Page 1647 | 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.6 Moving, Transferring, Connecting with Shafts and Joints DIN 808 Universal Joints with Friction Bearing Extract Stainless Steel, Single or Double 1 d 1 2 Bore code 3 d 2 (s) 4 l 2 (l 1 ) 5 Type 6 Material How to order 1 2 3 4 5 6 DIN808-32-B16-105-DG-NI 2 Bore code B Without keyway K With keyway V With square 5 Type EG Single, friction bearing DG Double, friction bearing Since the moveable parts are not surface treated, i.e. not case harde- ned, the possibilities of application of these universal joints are much more limited compared to the ones made of standard steel. Therefore, the guide lines for the selection of universal joints with friction bearing → Page 1644 according to the diagram may be applied at a limited ex- tent only . Rotational speeds over 200 min may become critical. For continuous use of the stainless steel universal joints, ample lubrica- tion is very important. This achieved by fitting the joint with a grease filled gaiter GN 808.1 → Page 1653 . The order example refers to universal joints with equal bores both ends d 2 or s. Information • Stainless steel AISI 304 NI • Keyway JS9 DIN 6885 → Page 2078 • Cross Holes GN 110.1 → Page 2081 • ISO Fundamental Tolerances → Page 2151 • Stainless Steel Characteristics → Page 2166 • RoHS Specification 6 • With other or unequal bores On request * not available from stock, requires a minimum order quantity 1 3 3 4 4 d 1 d 2 H7 Bore s H10 Square l 1 Type EG l 2 Type DG l 3 l 4 t +1 Max. assembly length of the shaft 16  6 V  6 *  34  56 17 22  8 16  8 V  8 *  40  62 20 22 11 22 10 V 10 *  48  74 24 26 12 25 12 V 12 *  56  86 28 30 13 32 16 V 16 *  68 105 34 37 16 42 20 V 20 *  82 128 41 46 18 50 25 V 25 * 108 163 54 55 26