Standard_Parts_Catalogue

Page 159 | 1.2 Operating by Using Machine and Device Handles GN 426.6 Stainless Steel Cabinet U-Handles 1 d 1 2 l 1 3 Type How to order 1 2 3 GN426.6-20-300-A 3 Type A Mounting from the back (threaded blind bore) B Mounting from the operator‘s side Information Stainless steel cabinet U-handles GN 426.6 can be mounted from the back (Type A) as well as from the operator’s side (Type B). In this case the stud is first screwed in from the machine side and then the handle is pushed on and secured with the grub screw. Both mounting methods allow the mounting of a pair of handles in oppo- site position. This method could be used e.g. on doors (double handle). In general, a mounting stud with special length l 2 might be required. Due to the manufacturing process, special designs can be supplied even in relatively small quantities. see also... • Cabinet U-Handles GN 425.1 (Aluminum / Stainless Steel, Angled) → Page 152 • Stainless steel AISI 304 d 1 = 20: solid material d 1 = 28: tube Ø 28 x 2 Matte shot-blasted • Threaded bushing / Mounting stud Stainless steel AISI 303 • Grub screw (Type B) d 1 = 20: DIN 914-M5-6-NI d 1 = 28: DIN 914-M6-8-NI • Load Rating Information → Page 2106 • Stainless Steel Characteristics → Page 2166 • RoHS Specification 1 2 d 1 l 1 ±0,5 ±0,3 d 2 d 3 h 1 h 2 l 2 r t 1 t 2 Type A Type B Threaded bore for mounting stud 20 200 200 M 8 - 105 68 20 22 15 - 20 300 300 M 8 - 105 68 20 22 15 - 28 250 250 M 10 32 128 90 20 32 - 17 28 350 350 M 10 32 128 90 20 32 - 17 28 500 500 M 10 32 128 90 20 32 - 17