Standard_Parts_Catalogue

Page 155 | 1.2 Operating by Using Machine and Device Handles GN 426.5 Stainless Steel Cabinet U-Handles 1 d 1 2 l 1 (l 2 ) 3 Type How to order 1 2 3 GN426.5-28-400-A 3 Type A Mounting from the back (threaded blind bore) B Mounting from the operator`s side Stainless steel cabinet U-handles GN 426.5 can be mounted from the back (Type A) as well as from the operator’s side (Type B). In this case the stud is first screwed in from the machine side and then the handle is pushed on and secured with the grub screw. Both mounting methods allow the mounting of a pair of handles in oppo- site position. This method could be used e.g. on doors (double handle). In general, a mounting stud with special length l 2 might be required. Due to the manufacturing process, special designs can be supplied even in relatively small quantities. see also... • Stainless Steel Tubular Handles GN 666.5 / GN 666.7 → Page 206 Information • Stainless steel AISI 304 d 1 = 20: Solid material d 1 = 28: Tube-Ø 28 x 2 Matte shot-blasted • Threaded bushing / Mounting stud Stainless steel AISI 303 • Grub screw (Type B) d 1 = 20: DIN 914-M5-6-NI d 1 = 28: DIN 914-M6-8-NI • Load Rating Information → Page 2106 • Stainless Steel Characteristics → Page 2166 • RoHS Specification 1 2 d 1 l 1 ±0,5 ±0,3 d 2 d 3 h l 2 r ≈ t 1 t 2 Type A Type B Threaded bore for mounting stud 20 200 200 M  8 - 68 20 22 15 - 20 250 250 M  8 - 68 20 22 15 - 20 300 300 M  8 - 68 20 22 15 - 20 350 350 M  8 - 68 20 22 15 - 28 250 250 M 10 32 90 20 32 - 17 28 300 300 M 10 32 90 20 32 - 17 28 350 350 M 10 32 90 20 32 - 17 28 400 400 M 10 32 90 20 32 - 17