Standard_Parts_Catalogue

Page 1522 | 3.4 Installing, Lifting, Damping with Leveling Feet, Lifting Gear and Rubber Elements GN 1130 Lifting Pins Steel / Stainless Steel Self-Locking 1 d 1 2 l 1 3 Material How to order 1 2 3 GN1130-8-10-ST Lifting pins GN 1130 are carrier elements designed for fast and easy use. Pressing the red aluminum button will release the locking effect of the locking ball, allowing the load bolt to be moved in or out of the holding bore hole. The shackle rotates by at least 180°, with a safety flange fitted as a safeguard against inadvertent operation. Depending on the direction of pull, the ball load bolt may move freely by 360° in the holding bore hole. Sling and lifting gear permanently remaining at the workpiece (e.g. load rings) is no longer necessary. Holding bore holes with d 1 H11 are suffici- ent in use with corresponding strength of materials. Furthermore, the holding bushings GN 1132 are also available. For more user guidlines, see the operating instruction enclosed with every lifting pin (see also under www.ganternorm.com ). Information • Steel ST - - Stud, shackle - - Heat-treated, manganese phosphated • Stainless steel NI - - Stud AISI 630 Age-hardened - - Shackle AISI 316Ti • Push button Aluminum, red anodized • Spring Stainless steel • Stainless Steel Characteristics → Page 2166 • RoHS Specification 3 1 2 d 1 −0,04 −0,08 l 1 +1 d 2 d 3 d 4 min. h 1 h 2 h 3 h 4 k 1 k 2 k 3 l 2 x min. y Nominal load in kN * F 1 F 2 F 3  8 10 9,35 21,5 9,9 87,5 38,5 25,7 27 9,5 49 30 8,75 5 1,5 1,5 1,2 0,5  8 15 9,35 21,5 9,9 87,5 38,5 25,7 27 9,5 49 30 8,75 5 1,5 1,5 1,2 0,5  8 25 9,35 21,5 9,9 87,5 38,5 25,7 27 9,5 49 30 8,75 10 1,5 1,5 1,2 0,5  8 35 9,35 21,5 9,9 87,5 38,5 25,7 27 9,5 49 30 8,75 20 1,5 1,5 1,2 0,5 10 15 11,7 21,5 12,2 87,5 38,5 25,7 27 9,5 49 30 10,2  5 1,5 2,7 2,4 2,1 10 25 11,7 21,5 12,2 87,5 38,5 25,7 27 9,5 49 30 10,2 15 1,5 2,7 2,4 2,1 10 35 11,7 21,5 12,2 87,5 38,5 25,7 27 9,5 49 30 10,2 25 1,5 2,7 2,4 2,1 10 50 11,7 21,5 12,2 87,5 38,5 25,7 27 9,5 49 30 10,2 40 1,5 2,7 2,4 2,1 12 15 14,2 21,5 14,7 87,5 38,5 25,7 27 9,5 49 30 11    5 1,5 3,5 3,2 2,8 12 25 14,2 21,5 14,7 87,5 38,5 25,7 27 9,5 49 30 11   10 1,5 3,5 3,2 2,8 12 35 14,2 21,5 14,7 87,5 38,5 25,7 27 9,5 49 30 11   20 1,5 3,5 3,2 2,8 12 50 14,2 21,5 14,7 87,5 38,5 25,7 27 9,5 49 30 11   35 1,5 3,5 3,2 2,8 16 25 18,6 25  19,2 92,8 47,5 31   27 9,5 49 30 15,1  10 1,5 4,8 4,5 4,1 16 50 18,6 25  19,2 92,8 47,5 31   27 9,5 49 30 15,1  15 1,5 4,8 4,5 4,1 16 75 18,6 25  19,2 92,8 47,5 31   27 9,5 49 30 15,1  35 1,5 4,8 4,5 4,1 20 50 24,5 30  25 114 55,9 36,5 32,6 11 56 36 19,7 25 1,5 10 8,5 6,5 20 75 24,5 30  25 114 55,9 36,5 32,6 11 56 36 19,7 45 1,5 10 8,5 6,5 * with 5-fold anti-fracture safety • Holding Bushings GN 1132 Accessory