Standard_Parts_Catalogue

Page 1520 | 3.4 Installing, Lifting, Damping with Leveling Feet, Lifting Gear and Rubber Elements High-strength, straight shackles GN 584 are made in analogy with the US Federal Specification RR-C-271 and feature sixfold safety standards, which means that the minimum failure load is at least six times greater than the value of the nominal load (WLL). The rated size and the nominal load (WLL) are drop-forged into the shack- le which makes it easier to select the proper sling gear. In general, the nominal load must not be exceeded. The designs with nut and split pin (Type B) are normally recommended for permanent connections. The bolts are allowed to rotate, and the nuts are secured against inadvertent loosening with a split pin. The operating instruction contains further guidelines and is included with every shackle (see also at www.ganternorm.com/en/service ). Information GN 584 Shackles Straight Version 1 d 1 2 Type How to order 1 2 GN584-16-A * in general, the bolts and screws are threaded as specified. Variances are possible, however. 2 Type A With stud bolt B Bolt with nut and split pin • Ring bracket - - Heat-treated steel, die-forged - - Hot-dip galvanised • Bolt - - Heat-treated steel, die-forged - - Galvanic zinc plated, lacquered • RoHS Specification 1 d 1 Nominal size b ±1 d 2 ±0,5 d 3 * d 4 h Nominal load (WLL) in inch UNC-thread  6 1 ⁄ 4 12  8 5 ⁄ 16 17 22 0,5  t [5,0 kN]  8 5 ⁄ 16 13 10 3 ⁄ 8 21 26 0,75 t [7,5 kN] 10 3 ⁄ 8 16 12 7 ⁄ 16 26 31 1,0  t [10,0 kN] 11 7 ⁄ 16 18 14 1 ⁄ 2 28 36 1,5  t [15,0 kN] 13 1 ⁄ 2 21 16 5 ⁄ 8 30 41 2,0  t [20,0 kN] 16 5 ⁄ 8 27 19 3 ⁄ 4 42 51 3,25 t [32,5 kN] 19 3 ⁄ 4 32 22 7 ⁄ 8 48 60 4,75 t [47,5 kN] 22 7 ⁄ 8 36 25 1 57 71 6,5  t [65,0 kN] 25 1 43 28 1 1 ⁄ 8 62 81 8,5  t [85,0 kN]