Standard_Parts_Catalogue

Page 1517 | 3.4 Installing, Lifting, Damping with Leveling Feet, Lifting Gear and Rubber Elements 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 GN 587.1 Load Rings continued Safety instructions The above details refer to the maximum load in metric tonnes. The configuration of the welding seam (HV) complies with the requirements of DIN 18800, i. e., the closed seam means that no corrosive deposits can settle; this also makes the load rings suitable for outside use. Welding must be made by an approved welder in accordance with EN 287-1. The specified loading values are valid for an operating temperature of between –20 °C and +100 °C. Load capacities under higher temperatures provided on request. If the load rings are used for lashing instead of lifting, the nominal load is doubled. The operating instruction contains further guidelines and is included with every load ring (see also at www.ganternorm.com/ en/service). Load ring size Size welding seam Length Volume in cm 3 b =  66 ( 1,5 t) HV  5 + a 3 2 × 33  1,2  77 ( 2,5 t) HV  7 + a 3 2 × 40  2,6  87 ( 4,0 t) HV  8 + a 3 2 × 46  3,2 115 ( 6,7 t) HV 12 + a 4 2 × 60  8,7 129 (10,0 t) HV 16 + a 4 2 × 60 15,5 a HV ~3 Method of mounting Number Angles of inclination Factor 1 0° 1 1 90° 1 2 0° 2 2 90° 2 2 0 to 45° 1,4 2 45 to 60° 1 2 asymm. 1 3 and 4 0 to 45° 2,1 3 and 4 45 to 60° 1,5 3 and 4 asymm. 1  66  1,50 t 1,50 t  3,00 t  3,00 t 2,10 t 1,50 t 1,50 t 3,15 t  2,25 t 1,50 t  77 2,50 t 2,50 t 5,00 t  5,00 t 3,50 t 2,50 t 2,50 t 5,25 t  3,75 t 2,50 t  87  4,00 t 4,00 t  8,00 t  8,00 t 5,60 t 4,00 t 4,00 t 8,40 t  6,00 t 4,00 t 115  6,70 t 6,70 t 13,40 t 13,40 t 9,50 t 6,70 t 6,70 t 14,00 t 10,00 t 6,70 t 129  10,00 t 10,00 t 20,00 t 20,00 t 14,00 t 10,00 t 10,00 t 21,00 t 15,00 t 10,00 t