Standard_Parts_Catalogue

Page 1411 | 3.3 Hinging, Latching, Locking of Doors and Covers Other important details and hints are given in the operating instructions for GN 239.4 hinges which are included with every hinge and which are also available as PDF downloads from „www.ganternorm.com “ under ‚Service‘. The hinges with switch must be mounted and commissioned by qualified technical personnel in compliance with the details given in the operating instructions and with the national and international rules and regulations and the applicable standards. Otto Ganter GmbH & Co. KG will assume no statutory liability for missing or incorrect information and for any consequences arising therefrom. GN 239.3 / 239.4 Hinges continued Mechanical features Maximum load Information without safety factor Examples of calculation → see operating instruction Load direction F A F R0 F R90 F max. 2100 N 2800 N 1300 N Fixing Types SH, SL und SR with countersunk for countersunk screws e.g. DIN 7991 Mounting information Recommended torque 5 Nm (Screws M6) Protection class IP67 acc. to EN 60529 Switching principle, contact opening Changeover contact, with positive opening acc. to IEC 60947-5-1 Contact material Silver alloy Ag 90 Ni 10 Operating travel diagram (scheme) The switching points are fix at 6°. By reaching the lifespan, it can rise up to 9°. → see operating instruction Maximum operating frequency 1200 / hour Mechanical life span 10 6 operating cycles acc. to IEC 60947-5-1 Actuating speed min. 2° / second, max. 90° / second Electrical and safety features Utilization category DC 13: 24 V DC / 4 A or 127 V DC / 0,3 A AC 15: 220 V AC / 4 A or 440 V AC / 3 A acc. to EN 60947-5-2 acc. to EN 60947-5-1 Contact termination 4-pole plug M12 or cable with 2 m or 5 m length Pin and cable assignment Type of cable UL/CSA STYLE 2587 3X AWG 22 Short-circuit current 1000 A Rated insulation voltage 250 V Short-circuit protection 6 A, 500 V, Typ gl Ambient temperature - 20 ° C ... + 80 °C Degree of pollution, external 3 Mission time (T M ) 20 years Number of cycles (B10 d) 2 000 000 Approvals, Conformities Low-voltage switchgear and controlgear CE declaration EN 60947-1-5 : 2003 + A1/2009 180° 0° 6° NC NO 15° -6° -10°