Standard_Parts_Catalogue

Page 1407 | 3.3 Hinging, Latching, Locking of Doors and Covers GN 239.6 / 239.7 Hinges with Safety Switch continued Mechanical features Maximum load Information without safety factor Examples of calculation → see operating instruction Load direction F A F R0 F R90 GN 239.6 2100 N 2800 N 1300 N GN 239.7 4500 N 7600 N 5800 N Fixing from the front, with contersunk screws or socket cap screws, e.g. DIN 7991 / DIN 912 from the back, with hexagon head screws or nuts, e.g. DIN 933 / DIN 934 Recommended torque 5 Nm (Screws and nuts M6) Protection class IP67 acc. to EN 60529 Switching principle, contact opening Slow-action contacts force-fitted, with positive opening acc. to IEC 60947-5-1, K Contact material Silver alloy Ag 999 Operating travel diagram (scheme) The switching points are adjustable up to 4° in direction of 0°. see operating instruction Maximum operating frequency 600 operating cycles / hour acc. to IEC 60947-5-1, one operating cycle includes one opening and one closing action Mechanical life span 10 6 operating cycles Actuating speed min. 2° / second, max. 90° / second 180° 0° 5° 8° NC NO 11° Electrical features Utilization category acc. to IMQ DC 13: 24 V DC / 2 A (connector plug) AC 15: 400 V AC / 4 A / DC 13: 250 V AC / 0,3 A (cable) acc. to EN 60947-5-1 acc. to EN 60947-5-2 acc. to UL Plug - C 300 / Q 300: AC / DC Control signals 24 V / 2 A electrical circuit cat. 2 Cable - C 300: 240 V AC / 0,75 A / Q 300: 250 V DC / 0,27 A / therm. current 2,5 A Contact termination 8-pole connector M12 or cable with 2 m or 5 m length Pin and cable assignment Type of cable UL/CSA STYLE 2587 8X AWG 22 Short-circuit current 1000 A acc. to IQM Rated insulation voltage 30 V AC/DC (connector plug) and 400 AC (cable) Short-circuit protection 4 A, 500 V, Type gG Ambient temperature - 20 °C up to + 80 °C Degree of pollution, external 3 acc. to EN 60947-5-1 Mission time (T M ) 20 years acc. to EN ISO 13849-1 Number of cycles (B10 d) 2 000 000 acc. to EN 61820-2 Approvals, Conformities, Applicability Low-voltage switchgear and controlgear CE declaration IMQ: CA02.04800 UL: E 360222 EN 60947-1/2007 EN 60947-1-5 : 2004 + A1/2009 Safety applications bis SIL 3 / PL e nach EN ISO 13849-1 Other important details and hints are given in the operating instructions for GN 239.6 hinges which are included with every hinge and which are also available as PDF downloads from „www.ganternorm.com “ under ‚Service‘. The hinges with safety switch must be mounted and commissioned by qualified technical personnel in compliance with the details given in the operating instructions and with the national and international rules and regulations and the applicable standards. Otto Ganter GmbH & Co. KG will assume no statutory liability for missing or incorrect information and for any con- sequences arising therefrom.