Standard_Parts_Catalogue

Page 1405 | 3.3 Hinging, Latching, Locking of Doors and Covers Mechanical features Maximum load Information with safety factor Examples of calculation → see operating instruction Load direction F A F R0 F R90 F max. 2000 N 2000 N 2000 N Fixing from the back, 10 x threads M6, 8 mm deep Recommended torque 10 Nm (Screws M6) Protection class IP67 / IP69K (Mind the cable conduit!) acc. to EN 60529 Switching principle, contact opening Slow-action contacts force-fitted, with positive opening acc. to IEC 60947-5-1 Contact material Silver alloy Operating travel diagram (scheme) The switching points are adjustable up to 2° in direction of 0°. → see operating instruction Maximum operating frequency 600 operating cycles / hour acc. to IEC 60947-5-1, one operating cycle includes one opening and one closing action Mechanical life span 10 6 operating cycles Actuating speed min. 2° / second, max. 90° / second Approvals, Conformities, Applicability Low-voltage switchgear and controlgear CE declaration EAC- and UL-certified EN 60947-1/2007 EN 60947-1-5 : 2004 + A1/2009 Safety applications until SIL 3 / PL e acc. to EN ISO 13849-1 Electrical features / Safety features Utilization category AC 15: 24 V AC / 2A / DC 13: 24 V DC / 2A ( connector plug) AC 15: 250 V AC / 3A / DC 13: 250 V DC / 0,3 A (cable) acc. to EN 60947-5-1 Contacts, termination 8-pole connector M12 or 9 wire cable with 2 m or 5 m length Pin and cable assignment Type of cable 9x0,34 mm², PVC H05VV-F, black acc. to IEC 60332-1 Short-circuit current 1000 A acc. to EN 60947-5-1 Rated insulation voltage 30 V AC / 36 V DC ( connector plug) / 250 V AC (cable) Short-circuit protection 2 A, 500 V, Typ gG ( connector plug) / 3 A, 500 V, Typ gG (cable) Ambient temperature - 25 °C up to + 80 °C Degree of pollution, external 3 acc. to EN 60947-5-1 Safety parameters B10: 1 000 000, B10 d: 5 000 000, B10 / B10 d: 20% acc. to EN ISO 13849-1 Other important details and hints are given in the operating instruction for GN 139.5 hinges which are included with every hinge and which are also available as PDF downloads from „www.ganternorm.com “ under ‚Service‘. The hinges with safety switch must be mounted and commissioned by qualified technical personnel in compliance with the details given in the operating instructions and with the national and international rules and regulations and the applicable standards. Otto Ganter GmbH & Co. KG will assume no statutory liability for missing or incorrect information and for any consequences arising therefrom. 7 NO NC 4 2,5 0 180 GN 139.5 / GN 139.6 Hinges with Safety Switch continued