Standard_Parts_Catalogue

Page 1360 | 3.3 Hinging, Latching, Locking of Doors and Covers GN 7243 Multiple-Joint Hinge continued l 1 s 1 max. b 1 s 2 b 2 max. s 3 max. b 3 max. 75 24 1 ... ∞ 1 ... ∞ 20 20 20 l 1 s 4 max. b 4 s 5 b 5 max. s 6 max. b 6 max. 75 20 1 ... ∞ 1 ... ∞ 24 20 20 2. Fastening flange mounted to the housing with slots perpendicular to the hinge axis: Doors, flaps and hatches can be inset, flush or mitered. The maximum wall thicknesses and bend sizes for sheet metal constructions given below arise from the respective installation type. 1. Fastening flange mounted to the housing with slots parallel to the hinge axis: Design variants The design variants shown represent standard installation conditions. If the installation position of the hinge is changed or one of the two wall thickness dimensions is lower than s or b, the maximum achievable dimensions change independently of each other. This makes it possible in some cases to work with larger wall thickness dimensions than those specified with the same hinge size. A simple design check via CAD or a test setup is therefore recommended.