Standard_Parts_Catalogue

Page 1314 | 3.3 Hinging, Latching, Locking of Doors and Covers 1 l 1 2 l 2 3 Type 4 Coding 5 Finish How to order 1 2 3 4 5 GN2295-72-335-A-C-EL Hinges GN 2295 are made of drawn profiled aluminum and are used on doors and covers, for example. Given the external hinge wing, type A hinges allow mounting with a very small door gap. The type I is fastened in the door gap. The mounting screws are therefore inaccessible and hence protected from vandalism when the door is closed. The hinges are delivered loose and must be mounted according to the accompanying instructions. Any hinge combination may be realized (if needed, also by shortening the middle wing) thanks to the modular design and available accessories. Information 3 Type A Exterior hinge wings I Interior hinge wings 4 Coding C With countersunk holes • Aluminum Anodized, natural color EL • Bearing bushing / Cover cap - - Plastic Technopolymer (Polyamide PA) - - Graphite gray, RAL 7024 • Tapered dowel pin ISO 8741 Steel Zinc plated, blue passivated • Plastic Characteristics → Page 2158 • RoHS Specification 5 • Other lengths and hole spacings • Other finishes On request GN 2295 Hinges for Aluminum Profiles / Panel Elements 1 2 l 1 l 2 d 1 d 2 l 3 l 4 l 5 l 6 m 1 m 2 m 3 m 4 s Type A Type I Type A Type I 72 86 125 6,6 14 40 40 36 43 40,8 55 42,5 - - 3,5 72 86 165 6,6 14 40 80 36 43 40,8 55 - 37,5 50 3,5 72 86 335 6,6 14 40 250 36 43 40,8 55 - 72,5 150 3,5 72 86 485 6,6 14 40 400 36 43 40,8 55 - 72,5 150 3,5

RkJQdWJsaXNoZXIy MTQ2MTM=