Standard_Parts_Catalogue

Page 1247 | 3.3 Hinging, Latching, Locking of Doors and Covers GN 119.3 Latches with Cabinet U-Handle continued By turning the latch clockwise the stepped cam latch moves up behind the door frame and pulls the door in. The large pulling-in range of the cam (10 mm) allows these locks to be used successfully on doors with sealing strips. When selecting clamping range A the thickness of the door seal might have to be taken into consideration. For mounting, the door is fitted with two bore holes as shown in the outline drawing opposite, attached at a distance of 23 mm from the door frame. The spigot (M22x1,5) has 4 surfaces, allowing the cabinet U-handle also to be used with the standard bore holes of door latches GN 119 → Page 1240. The lock housing with the preassembled operating bolt is fitted into the hole from the front and held in position with the hexagon nut. The distance piece and the cam latch are then fitted at the rear and fixed with the hexagon nut. Technical and assembly instructions Latches with Cabinet U-Handle GN 119.3 Latches with Cabinet U-Handle GN 115.7 → Page 1222 Socket Keys GN 119.2 → Page 1266