Standard_Parts_Catalogue

Page 1211 | 3.3 Hinging, Latching, Locking of Doors and Covers GN 115.1 Mini-Latches continued For installation, set a hole in the door, cover or hatch as shown in the outline drawing. Once assembled, the latch is pushed through the bore diameter from the front. The hexagon nut can then be pushed over the latch from the back and bolted in place. The required installation bore in the door leaf, is usually genera- ted by punching or laser machining in series production. The installation bore diameter can also be created by drilling or milling as shown in the outline drawings. For small series and steel sheets below 2 mm thickness, the sheet metal punch GN 123 are the tool of choice → Page 1267. Construction and assembly instructions