Standard_Parts_Catalogue

Page 1180 | 3.2 Mounting, Positioning, Leveling with Screws, Clamping and Supporting Elements GN 1024 Spring Cotter Pins Steel / Stainless Steel 1 Material 2 d 1 3 Type How to order 1 2 3 GN1024-ST-2-E 2 Type D d 1 d 2 d 3 h l 1 l 2 l 3 l 4 s Load in N ≈ For bolt Ø Recommended holding Ø Mounting Dismantling For bolt Ø 2  8...14 2,5 14  56 31 25 33  5,5 10  9 12 3 14...20 3,5 22  73 43 30 47  8    35 28 16 4 17...24 4,5 32  94 58 36 62 10,5 50 35 20 5 18...30 5,5 35 110 70 40 73 13,5 100 95 25 6 24...36 6,5 41 142 85 57 90 16   190 125 30 7 * 26...40 7,5 42 152 92 60 96 19   350 210 40 Spring cotter pins GN 1024 are used for the axial fixing of bolts and axes and as distortion guard, e.g. for crown nuts DIN 935. Owing to their double winding, spring cotter pins of Type D have a flatter spring characteristic and are therefore easier to install. Also, a retaining rope including a key ring can be attached to the double winding to safe- guard the spring cotter pins against loss. Information * only available in steel • Steel ST Zinc plated, blue passivated • Stainless steel AISI 303 NI • Stainless Steel Characteristics → Page 2166 • RoHS Specification 1 2 Type E d 1 d 2 d 3 h l 1 l 2 l 3 l 4 Load in N ≈ For bolt Ø Recommended holding Ø Mounting Dismantling For bolt Ø 1,5 7...12 2    9  45 25 20 25   9  8  8 2    9...14 2,5 13  57 32 25 34  14  9 12 3   10...16 3,5 23  72 42 30 44  55 40 16 4   16...20 4,5 27  74 44 30 48 210 170 20 5   20...28 5,5 32 102 57 45 61 280 210 25 6   28...40 6,5 42 126 73 53 77 240 150 30 3 Type E With single winding D With double winding