Standard_Parts_Catalogue

Page 1134 | 3.2 Mounting, Positioning, Leveling with Screws, Clamping and Supporting Elements GN 350 Leveling Sets Steel / Stainless Steel Long Version 1 d 1 2 d 2 3 Type 4 Material How to order 1 2 3 4 GN350-45-13,5-AK-ST 3 Type A Without lock nut AK With lock nut 1 2 d 1 d 2 d 3 h 1 h 2 h 3 Adjustable range for Static load F in kN Code no. C-Spanner Type A Type AK Type A Type AK screw Steel Stainless steel F 1 F 2 F 1 F 2 25 6,6 M 15 x 1  28 33 43 15 10 M  6 40 30,7 27,1 20,2 DIN 1810-A25-28 32 6,6 M 20 x 1  35 41 55 20 14 M  6 65 55,7 43,4 36,5 DIN 1810-A30-32 32 9  M 20 x 1  35 41 55 20 14 M  8 65 48   43,4 30,8 DIN 1810-A30-32 32 11  M 20 x 1  35 41 55 20 14 M 10 65 37,9 43,4 23,4 DIN 1810-A30-32 45 11  M 30 x 1,5 42 49 67 25 18 M 10 120 92,9 84   64   DIN 1810-A45-50 45 13,5 M 30 x 1,5 42 49 67 25 18 M 12 120 80,4 84   54,8 DIN 1810-A45-50 45 17,5 M 30 x 1,5 42 49 67 25 18 M 16 120 45,5 84   28,9 DIN 1810-A45-50 58 17,5 M 40 x 1,5 54 63 86 32 23 M 16 210 136  148   92,9 DIN 1810-A58-62 58 22  M 40 x 1,5 54 63 86 32 23 M 20 210 90  148   59   DIN 1810-A58-62 58 26  M 40 x 1,5 54 63 86 32 23 M 24 210 37  148   20,3 DIN 1810-A58-62 70 22  M 50 x 1,5 66 77 106 40 29 M 20 330 210  225  136   DIN 1810-A68-75 70 26  M 50 x 1,5 66 77 106 40 29 M 24 330 157  225   97,3 DIN 1810-A68-75 70 33  M 50 x 1,5 66 77 106 40 29 M 30 330 53  225   20,6 DIN 1810-A68-75 80 26  M 60 x 2  76 87 126 50 39 M 24 495 322  323  195,3 DIN 1810-A80-90 80 33  M 60 x 2  76 87 126 50 39 M 30 495 218  323  118,6 DIN 1810-A80-90 80 39  M 60 x 2  76 87 126 50 39 M 36 495 101  323   38,2 DIN 1810-A80-90 Leveling sets GN 350 are used for leveling and linking operations. They comprise a threaded upper sleeve and an internal threaded lower sleeve. The fine thread allows a stepless and precise setting and locking using the C-Spanner DIN 1810. A locking ring serves also as a height limiter for the max. height. Normally this screw is permanently and securely locked by the static load created when the mounting screw is tightened. Should this not be sufficient, the use of a locknut (Type AK) is recom- mended. Information • Steel, 1.7225 (42 CrMo 4 V) ST Zinc plated, blue passivated • Stainless steel AISI 303 (X 10 CrNiS 18-9) NI • F 1 : max. total load • F 2 : max. load after deduction of the max. preload - - for screws 8.8, µ = 0,125 (Steel) - - for screws 6.8, µ = 0,14 (Stainless steel) • Stainless Steel Characteristics → Page 2166 • RoHS Specification 4 • C-Spanner DIN 1810 (code no. see table) Accessory