Standard_Parts_Catalogue

Page 1105 | 3.2 Mounting, Positioning, Leveling with Screws, Clamping and Supporting Elements 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 Stainless steel locking plates GN 187.5 can be installed in combination with locking joint sets GN 187.6 to create locking joints. This allows gear lever handles and retaining tubes or trays and mounts to be adjusted relative to each other at defined angles with a form-locking connection. The angle orientation of the teeth is adapted to the connecting elements, permitting an axis-parallel or right-angled arrangement. Held together and centered by locking joint sets, the various types can be combined together arbitrarily with identical the nominal sizes d₁. Stain- less steel pressure springs GN 187.2 can be placed between the locking heads during mounting, allowing a clean separation upon removal. Ad- ditional design possibilities arise from the compatibility of the locking heads with the locking plates GN 187.4. When welding on, type E be easily positioned on the opposing part and fastened by means of the mounting holes d 8 (which are aligned with the teeth) using dowel pins or positioning pins. see also... • Stainless Steel Serrated Locking Plates GN 188 → Page 1108 Information • Stainless steel precision casting NI AISI CF-8 Matte shot-blasted • Stainless Steel Characteristics → Page 2166 • RoHS Specification 4 • Locking Joint Sets GN 187.6 → Page 1106 • Serrated Locking Plates GN 187.4 (Steel / Stainless Steel) → Page 1100 • Stainless Steel Pressure Springs GN 187.2 → Page 1103 Accessory Application examples GN 187.5 Stainless Steel Locking Plates continued 1 d 1 2 Number of teeth z 3 Type 4 Material How to order 1 2 3 4 GN187.5-32-48-DH-NI