Punches_and_Dies

Ref: S-80 Urethane Headless Stripper When using with strippers - Increased resistance to kinking of the punch - No pull-in of the sheet metal element thanks to play-free seat on the punch The strippers fit off-the-shelf punch shanks and punch retainers. The self-cut punch contour on the cutting shank as well as the dimension-adapted inner diameter guarantee self-adhering seat. The stripper length equals the largest installation dimension. It can be adapted if the dimensions underrange this size. Installation The length of the stripper should be 1 to 2 mm longer than the free punch length. When installing, ensure that there is sufficient space to accommodate for bulging. How to Order: Ref: S-80 d=06 L=55 => S-80-06-55 (Pressure (kgf) = Pressure (N) x 0.101972) 3mm 6mm 9mm 4 17 45 600 1150 ~ 6 19 650 1200 1800 8 21 700 1300 2100 10 23 900 1600 2400 13 26 1100 1900 3000 16 30 1400 2300 3700 20 38 2100 3600 5500 25 50 3700 6500 10200 7 3 55 1.6 Stripper Force (N) at deformation of ø d d 1 D L 1 L 63