Presses

A A A-A AUTOMATIC GREASING WITH LEVEL MONITORING (standard on 45T and 80T) Automatic lubrication is done in place of manual centralized greasing. It ensures better lubrication of the machine without any risk of omission by the operator. This option is strongly recommended in case of automatic working. PNEUMATIC STRIPPER (25T, 45T, 80T) Ensuring the same function as the rubber stripper, the pneumatic stripper delivers more significant power, from 3t on 25T and 45T presses, to 7t on 80T presses. Its air tank ensures constant pressure. RUBBER STRIPPER (6T, 15T and 25T) Rubber stripper, mounted on table bore, allows ensuring the ejection of tooling parts. Its power is adjustable by adjusting the tension of the rubber contacts. SPEED VARIATOR WITH SELECTION BY POTENTIOMETER In order to adjust the stroke rate of the press in the automatic work cycles, or for a slow descent in regulation with motor phase, all the mechanical presses can be delivered with a speed variator, adjustable by potentiometer. TABLE FRAME SUPPORT PLATE ENV. STROKE 30 mm STRIPPING FORCE ADJUSTING NUT 3 x 3 BLOCKS Ø 50 x 40 EJECTOR REMOVABLE TABLE REMOVABLE TABLE TABLE PRESS FRAME EJECTOR FANTINI POT FIXING COLUMN FANTINI POT SLIDERAXIS Additional options / / / • Pedal control for working with embedded tools or stroke < 6 mm. • Supply cam with 3/2 valve and closing valve. • 6 digit preselection counter in order to stop the press as soon as the quantity is reached. • Halogen or neon or LED lamp lighting on 500 flexible lines. • Expansion chamber on exhaust for reducing the sound levels (-2dB). • Set of anvil stakes. • Anti-vibration supports. • Special RAL paint. *Definition: The embedded tools must be intrinsically safe. Their corresponding openings and safety distances must be in compliance with the standards in force or must not exceed 6 mm. Any risk of additional defor-mation outside the embedded tools must be avoided. EMG PRESSES 47