Presses

• Frame The frame is made of high quality mechanizedwelded steel with swan-neck structure. Regular weld seams and proper welding supports ensure an exceptional rigidity and a resistance against cutting impacts even during an intensive use. The very thick sides of the frame reduce the swanneck opening. • Slider The slider is made of cast iron FGS 300 mounted on steel or bronze sliding rails, adjustable by screws. The assembly is completelyadjusted and scrapedmanually. The adjustment is carried out by stops mounted on the press frame. The bedplate of the slider has holes and a central bore for fixing tools. The sliding rails have machining in the form of “oil grooves” allowing an efficient lubrication. A knock-out bar goes through the slider. The adjustment is carried out by a stop mounted on the frame. • Connecting rod/Swivel screw The connecting rod is made of FGS 300 cast iron (steel on 80T) with bronze line completely scraped ensuring a perfect lubrication. It is lubricated by oil. The swivel screw is made of pre-treated steel, completed by a surface treatment. • Shaft The shaft is made of hardened forged steel. An over- sulfinization after machining reduces the wear and tear due to friction. It runs on lubricated rings. • Stroke change The stroke change is achieved very quickly by turning the disconnecting device of a turn and then selecting the desired stroke length. • Lubrification The lubrication is centralized and ensured by a manual pump. The frequencies are to be adapted as per the cycles used (single or continuous stroke working). Automatic pump (optional). • Twin-body solenoid valve It is self-controlled and assembled with heavy duty silencers. • Clutch/Brake The movements of the press are obtained by a monodisc air clutch and managed by a brake. An air reservoir compensates for the possible failures of the network starting from the 25t model. • Two hand controls with push buttons. • Central greasing by manual pump • 6 digit counterwith reset function, 8 digit counterwithout reset function • Single or continuous stroke • 20° inclinable frame (option 45t and 80t) • Regulation with or without motor • Positive ejector in the slider • Balancing cylinders (45t and 80t) • Slider hydraulic unblocking (45t and 80t) • Automatic unblocking for the stroke adjustment (80t) • EC compliance certificate • User manual and electrical, pneumatic and hydraulic diagrams • Periodical verification guide (regulatory follow-up, verification procedures, preventive maintenance, faults and remedies) Mechanical Presses Characteristics of the Range Mechanical Presses Standard Equipment Standard control panel for mechanical presses EMG PRESSES 41