Presses

Force Monitoring for Manual and Pneumatic Presses Solution 1 Force + thresholds Solution 1 makes it possible to evaluate the force instantaneously or by pre-setting a minimum and maximum force. A green or red smiley or a bargraph, coupled with a buzzer, will indicate the smooth running of the press cycle. Peak values are also available. Solution 2 Force + displacement + thresholds Solution 2 makes it possible to evaluate the force and the displacement instantaneously or by pre-setting a force and a minimum and maximum stroke. A green or red smiley or a bargraph, coupled with a buzzer, will indicate the smooth running of the press cycle. Peak values are also available. Solution 3 Force + displacement + curves Solution 3 makes it possible to evaluate the force and the displacement by setting either thresholds, windows or enveloping curves. The evaluation curve will instantly appear on the screen. A green or red smiley, coupled with a buzzer, will indicate that the press cycle is running smoothly. • Three standard solutions exist in the range. • Specific solutions can be proposed according to customer needs. Force sensor (PN) Nominal power 2 kN -> 60 kN Plug and play ☺ Overload (in % of PN) 150% Breakage (in % of PN) 300% Accuracy (in % of PN) 0,25% < 5kN / 0,5% > 5kN Sensor height (mm) free height loss ± 60mm Protection class IP67 Tool attachment Ø16H7 x 26mm Displacement sensor Type potentiometric (other on request) Plug and play ☺ Stroke 100 -> 500mm Accuracy (in % of stroke) ±0.05 % Lifetime 100 x106 movements Protection class IP65 EMG PRESSES 21